How to Wind your Watch Correctly? Step by Step Guide
How to wind the watch correctly, who needs to do it and what else is the crown capable of? These questions must have been asked at least once by any owner of a mechanical watch . Answering them, let's take a short digression into history to find out: how did the clock start before?
Crown Location
The standard crown position for mechanical watches is at 3 o'clock, that is, at the far right when looking directly at the dial. The “4 o’clock” models are less common, but they also do not cause surprise, rather they add an additional touch to the style of the product. By the way, such an arrangement of the head can cause discomfort when worn by a right-handed person on the left hand. In particular, V.V. Putin complained about this, which therefore wears a watch on his right hand, although he is right-handed. Add info: for left-handed people there is a clock with a "9 o'clock" clock.
But earlier, the crown was not always in the usual place now. In pocket watches, it was located at the highest point, and in wrist watches it was completely absent: its function was performed by the winding key on the side of the case. With this in mind, the current position of the head is optimal in terms of plant convenience.
Watch winding principle
In a mechanical watch rafiqsonsonline.com/product-category/casio/edifice/, the hands move thanks to the energy of a tightened spiral spring. Over time, it dissolves, so it needs to be twisted, which happens as a result of the circular movement of the crown. Unwinding, the spring again drives the clock mechanism through a system of teeth and gears. Accordingly, if the spring completely loses energy, then the clock stops.
In itself, the fact that a mechanical watch stops is not critical. Yes, with constant factory shutdowns, the resource of some parts is reduced. However, in the application to modern mechanisms, the inconvenience lies only in periodically setting the correct time and winding the watch. To offset this inconvenience, engineers have introduced an automatic winding function - when the spring is twisted by simply shaking the watch. But there are classic models without automatic winding that need to be wound manually. How often should this be done and how to avoid mistakes?
How to wind the Watches
Only mechanical watches need winding. Quartz watches are battery operated, do not need to be wound, and the crown is purely decorative. Quartz watches do not need to be wound
Mechanical watches rafiqsonsonline.com/product-category/casio/ should be wound by moving the crown “clockwise”. Movements should be smooth, without sharp scrolling, as in this case the winding mechanism can be damaged. You need to “tighten” the spring until you feel stiff movement: this means that the spring is fully charged. Usually it takes no more than 15-20 turns.
Moreover, if the head always rotates tightly, even at the beginning of the plant, this may indicate a malfunction of the mechanism or problems with lubrication. In this case, it is better to contact a specialist.
Setting the date and time using the crown
The crowns on mechanical and quartz watches function differently. If in quartz moving the head to the extreme right position means opening with the battery (that is, the clock stops), then in mechanics the same position is intended for setting the date. In this case, turning the crown back (counterclockwise) can lead to breakage of the calendar mechanism, if there is one in the watch.
Mechanical watch with calendar function It is better to set the date around 6 o'clock, when the mechanism is in maximum safety. If the time is approaching 12 o'clock, when the mechanism will soon translate the number itself, it is better to refrain from tuning, since there is a high risk of damage to the mechanism.
Finally, the main tip concerns the frequency of winding. Some models can live on a cocked spring for 48 hours, that is, two days. However, it is desirable that the spring be in a state close to cocked. To achieve this, there is one simple tip. Wind up a mechanical watch at about the same time every day - then they will serve you without failures and breakdowns for many years!
